Week No: 12

Week No: 12

Date: 27 May 2020

Activity:
Placing/ Sorting the components on a cardboard. Tie the connector wire firmly which is attached to the components.

Objective:
1.     To place components onto the cardboard and arranging it in a proper manner.
2.    To tie or sorting the connector wires which is attached to the components which is used in this project.

Content/ Procedure:
1.      To list down the components used in this project.
2.      Create a rough sketching on a piece of paper and figure out where each component must be placed.
3.      Changing the jumper wire accordingly to its length, for example 10cm, 20cm, or 30cm.
4.      To connect heat, shrink with the jumper wire/ connector wire to make it neat.

Result and Analysis:
1.     To place the components accordingly to the sketch that is made earlier, onto the cardboard.
2.   Applying adhesive onto the component to stick it onto the board. In this situation, double tape is selected to use as the adhesive because it is ease to remove.
3.   Applying heat shrink with the jumper wire/ connector wire and applying heat to it so that the wire would be neat.
4.   Testing the project again to verify it is in working condition and there isn’t any error due to the process.
     
      Conclusions:
      As a conclusion, this process of placing the components and sort the wires in this project is done successfully. The outcome had matched the expectation made earlier. The project is few steps ahead to completion.  

 Pictures:


Comments

Post a Comment

Popular posts from this blog

Week No: 16

Week No: 16 Date: 24 June 2020 Activity: Final Year Project 2 submission is approaching, the thesis and technical report should be completed. Objective: 1.       To verify the thesis and technical report with supervisor and Final Year Project coordinator. 2.       To print out the thesis and hardcover for Final Year Project. Content/ Procedure: 1.       In this meeting I have met supervisor and FYP coordinator to verify the documents which is signed by Mr. Saharuddin. The Final Year Project coordinator would accept the particular documents needed. 2.     Then, the next step is to find a suitable place/ shop to print the documents needed for Final Year Project. Result and Analysis: After printing the particular documents, hardcover and technical report. I then need to verify these documents to the Final Year Project coordinator again before submitting it to the UniKL BMI Library. My report t...
Read more

Week No: 1

Image
Week No: 1 Date: 12 February 2020 Activity: The first week of Final Year Project 2 has begun, the first thing that need to be done is to continue progress report that had been done earlier previous semester. Objective: 1.        To plan and organize the 17 weeks for Final Year Project 2. 2.        To continue the progress report which is done earlier in previous semester for Final Year Project 1. 3.        To complete this semester accordingly as planned. Content/ Procedure: Previous Final Year Project 1 Content/ Progress Report: - a.       Chapter 1: Introduction b.       Chapter 2: Literature Review c.       Chapter 3: Methodology Result and Analysis: 1.       To add/ construct Final Year Project progress report which is necessary accordingly for the project. 2.    ...
Read more

Week No: 2

Image
Week No: 2 Date: 19 February 2020 Activity: Final Year Project 2 Briefing held at Gemilang Hall in conjunction with FAVARIOT IOT DAY 2020. Objective: 1.      To give briefing on Final Year Project handbook, Project Development, Progress Report, attendance and assessment forms. 2.     To attend, understand and gather as much information during FAVARIOT IOT DAY 2020 held at Gemilang Hall. Content/ Procedure: On 19 th February 2020, Final Year Project 2 Briefing held at Gemilang Hall in conjunction with FAVARIOT IOT DAY 2020 and attendance is compulsory. This event is conducted by R& I and Electrical Engineering Sections, UniKL BMI. Date     : 19 th February 2020 Venue : Gemilang Hall Time     : 2.30pm – 5.30pm Result and Analysis: In this briefing we were told to: 1.     Assessment that need to be cover for FYP 2 which is final report (logbook/blog), presentation, and proj...
Read more